The Gutless DH Seatpost
Immortalize your favorite seat
|
Related Items:
|
Nothing trashes seat rails and seat guts like a bike cartwheeling into a tree. Downhilling is notorious for bike component destruction. Most MTB seats and posts aren't made with tree impacts in mind. Thick removes the weenie rails and clamp and replaces it with welded 4130 chrome-moly tubing. The fore/aft position and angle of tilt are forever fixed so this product is strictly custom. Should the seat become worn and need changing, it can be easily removed and replaced with the same or a similar seat by removing two bolts.
|
|
This Post was made for the world's burliest DH ride: The Super Trucker. Below is the underside view of the same post. Unless the bike is upside down you would never notice the Gutless Post. It just quietly does its job out of sight and out of mind. One less thing to worry about.
|
|
Gutless Post Technical Specifications
Made entirely of 4130 tube and 1/4" plate
Quality "Grade 8" hardware available in 5/16" or 3/8"
Available in 7/8"(22.2mm), 1" (25.4mm), 1 1/8" (28.6mm), 1 1/4" (31.7mm)
or 1 3/8" (34.9mm) post diameter
Shims are available to fit wacky metric MTB sizes
Available in 0.065" wall, 0.083" wall or thicker
Available raw or painted
How to order a Gutless Post
|
All Products
